Electricity class 10 Notes Science

myCBSEguide App

Download the app to get CBSE Sample Papers 2023-24, NCERT Solutions (Revised), Most Important Questions, Previous Year Question Bank, Mock Tests, and Detailed Notes.

Install Now

CBSE class 10 Science Chapter 12 Electricity notes in PDF are available for free download in myCBSEguide mobile app. The best app for CBSE students now provides Electricity class 10 Notes latest chapter wise notes for quick preparation of CBSE board exams and school based annual examinations. Class 10 Science notes on Chapter 12 Electricity are also available for download in CBSE Guide website.

CBSE Guide Electricity class 10 Notes

CBSE guide notes are the comprehensive notes which covers the latest syllabus of CBSE and NCERT. It includes all the topics given in NCERT class 10 Science text book. Users can download CBSE guide quick revision notes from myCBSEguide mobile app and my CBSE guide website.

Class 10 Science notes Chapter 12 Electricity

Download CBSE class 10th revision notes for Chapter 12 Electricity in PDF format for free. Download revision notes for Electricity class 10 Notes and score high in exams. These are the Electricity class 10 Notes prepared by team of expert teachers. The revision notes help you revise the whole chapter in minutes. Revising notes in exam days is on of the best tips recommended by teachers during exam days.

Revision Notes for Class 10 Science Download as PDF

CBSE Class 10 Science Revision Notes Chapter 12 Electricity

In the recent times,life would be impossible without electricity. From lighting our homes, charging our devices, electricity has become an integral part of our day-to-day live. So it becomes necessary to understand the origin,characteristics and utilisation of electricity. In the current chapter we will discuss :

Electric Current and Circuit
Electric Potential and Potential Difference
Circuit Diagram
OHM’s Law
Factors on which the resistance of a conductor depends
Resistance of a system of resistors
Heating effect of electric current
Electric Power

Charge $\to$ (q)

Charge is a characteristic unit of matter by means of which matter experiences electric forces. It can be either negative (electron) or positive (proton)

“Coulomb” is the SI unit of charge, represented by C.

Net charge (Q) – Total charge

1C Net charge is equivalent to the charge contained in nearly electrons $6 \times {10^{18}}$ electrons.

Q = ne

(n is no. of electrons)

If Q= 1C, $e = 1.6 \times \;{10^{ - 19}}C$ (negative charge on electron)

$n = \frac{Q}{e} = \frac{1}{{1.6 \times {{10}^{ - 19}}}}$

= $\frac{{100}}{{16}} \times {10^{18}} = 6.2 \times {10^{18}}$

$n = 6 \times {10^{18}}$ electron

Current (I)

Rate of flow of net charge is called current. Denoted by (I)

$I = \frac{Q}{t}$

Electric current can also be defined as the amount of charge flowing through a unit cross-section in per second.

SI unit of current is “Ampere” .Denoted by A.

Ampere $\to$ Defined as one coulomb of charge flowing per second.

$1A = \frac{{1C}}{{1S}}$

In an electric circuit the electric current flow in an opposite direction to the flow of electron (–ve charge).This current is called conventional current.It flows from the +ve terminal battery or cell to –ve terminal. Small quantity of current are expressed in

mA (milli Ampere) = ${10^{ - 3}}A$

µA (micro Ampere) = ${10^{ - 6}}A$

Ammeter : It is an instrument used to measure the electric current in a circuit. It is always connected in series in a circuit. It has low resistance(practically).Ideally ammeter’s resistance must be zero. It is represented as

$- - - (A)- - - -$

Electric Circuit : It is a closed path along which the electric current flows.

The electrons can only flow when there is difference of electric potential. For example “water flowing through a tube”. It is only possible when there is high pressure at one side and low at another side, then it will move from high pressure to low pressure.

In case of electric current, the flow of charge is made possible due to chemical action with in a cell that generates the potential difference across theterminals of the cell.

Electric potential Difference : It is defined as the work done in carrying a unit charge from one point to another in an electric circuit.

$V = \frac{W}{Q}$
V – Potential Difference
W – Work
Q – Net Charge

SIunit of potential difference – Volts.Denoted by “V”. It is named after Alessandro Volta.

One Volt $\to$ When 1 Joule of work is done in carrying one coulomb (1C)of charge from one point to another of a current carrying conductor then the potential difference is said to be IV.

$1V = \frac{{1J}}{{1C}}$

Voltmeter $\to$ It is an instrument, used to measure the potential difference and represented by the symbol $- - - {}^ - {(V)^ + } - - - - -$ in an electric circuit. It is always connected in parallel across the points between which the potential difference is to be measured. It has high resistance.

Circuit Diagram :A circuit diagram (electrical diagram, elementary diagram, electronic schematic) is a graphical representation of an electric circuit.

Symbols for some commonly used instrument in circuit diagram:

OHM’s LAW

George Simon Ohm found the relationship between the current (I) flowing through a conductorand potential difference (V) across the terminals of a conductor using the circuit diagram. He observed that the potential difference and current varied linearly.

Ohm’s Law $\to$ He stated that the electric current flowing through a conductor is directly proportional to the potential difference across its ends, under standard temperature and pressure conditions.

$\begin{gathered} V \propto I \\\ V = IR \ \end{gathered}$

Where “R” is the proportionality constant for the given metal at given temperature and is called resistance.The graph between V and I is always straight line with slope equal to R.

Resistance : It is the property of a conductor that opposes the flow of current. It is represented by ‘R’ and symbol is $\Omega$

SI unit of resistance is “Ohm”.

1 Ohm : The resistance of a conductor is said to be one Ohm, when the potential difference across the conductor is 1V and the current flowing through it is 1A.

V = IR

$\therefore R = \frac{V}{I}$ IR = V

Rheostat

As we know that

$V = IR$

$\therefore \;1 = \frac{V}{R}\left\{ \begin{gathered} {\text{Shows that current through}} \\ {\text{conductor}} {\text{resistor is inversely}} \\ {\text{proportional to its resistance}} \end{gathered} \right\}$

So to increase or decrease the current accordingly in the circuit a component used is called “Rheostat”, that regulates the current without changing potential difference. Represented by “Rh”.
Its symbol is
If a conductor has less Resistance, then more current will flow through it.

Factors on Which Resistance of a Conductor Depends

1. On its length (L)
2. On its cross sectional area (A)
3. On the nature of material.
(Resistance) R $\Omega$ L (Directly prop. to length)

$R\alpha \frac{L}{A}$ (inversely prop to cross-sectional area)
$R =\rho \frac{L}{A}$

Where “ $\rho$ ” (rho) is a proportionality constant known as resistivity of the material of conductor.

Resistivity ( $\rho$ ) : The resistance offered by a wire of unit length and unit cross-sectional area is called resistivity.

Its SI unit is $\Omega \;m$

$Since\;R = \rho\;\;\frac{L}{A}$

$\therefore \;\rho = \frac{{R.A}}{l} = \;\;\frac{{\Omega {m^2}}}{m}$

$\therefore \;\;\;SI\;unit\;of\;\; = \Omega m.$

For a material irrespective of length and area, the resistivity is a constant.

Resistivity of a Material varies with Temperature

Resistivity is the measure of resistance of a material. In other words, upto what extent will the material resist current flow.

Resistivity of an alloy (homogeneous mixture of metals) is generallyhigher than of its constituent metals. Example: Constantan (alloy of Cu & Ni)

Alloys have high resistivity and do not oxidise (burn) readly at hightemperature, for this reason they are commonly used in electrical heating devices,like electric iron, heater, toasters etc. For example “Tungsten” as filament of electric bulb.

Resistance of a system of resistors

Resistance in Series (Maximum Effective Resistance)

Let us take three conductors/resistors of resistance R1, R2 and R3 that areconnected in series in a circuit.

Ohm’s law stated
V = IR

The current (I) flowing through the resistance in series will remain same,where as the potential difference (V) across each resistor will be different.

V = IR
${V_1}\; = I{R_1}$ ${V_2}\; = I{R_2}$ ${V_3}\; = I{R_3}$

Total potential difference $(V) = {V_1} + {V_2} + {V_3}$
$I R = I ({R_1} + {R_2} + {R_3})$
${R_{eff}} = {R_1} + {R_2} + {R_3}$

Thus, we conclude that effective Resistance of the several resistors joinedin series is equal to the algebraic sum of their individual resistances.Also, the net resistance increases when resistors are connected in series.

**Resistance in Parallel (Minimum Effective Resistance)**

Let us take three resistors of resistance that are connectedin parallel in the electric circuit.

Now,

${I_1} = \frac{V}{{{R_1}}},\;\;{I_2} = \frac{V}{{{R_2}}},\;{I_3} = \frac{V}{{{R_3}}}$

Total current $(I) = {I_1} + {I_2} + {I_3}$ substitute the value of ${I_1} + {I_2} + {I_3}\;{\mathbf{and}}\;{\mathbf{I}}$

$\frac{V}{R} = \frac{V}{{{R_1}}} + \frac{V}{{{R_2}}} + \frac{V}{{{R_3}}}$

$\frac{V}{R} = V\left[ {\frac{1}{{{R_1}}} + \frac{1}{{{R_2}}} + \frac{1}{{{R_3}}}} \right]$

Thus, we conclude that the reciprocal of total effective resistance of theseveral resistors connected in parallel is equal to the sum of the reciprocals of the individual resistances.Also ,the net resistance reduces when resistors are connected in parallel.

Disadvantage of Series Connection in an Electric Circuit

1. In series connection if any of the component fail to work, the circuit will break and then none of the component (ex. TV, bulb, fan..) willwork.

2. It is not possible to connect a bulb and a heater in series, because they need different value of current to operate properly.

Hence, to overcome this problem we generally use parallel circuit.

Heating Effect of Electric Current

Explanation $\to$ Battery or a cell is a source of electrical energy.

1. Battery or cell (Chemical reaction in it will produce potential difference at its two terminals)
2. Electron will come in motion to flow current through resistor
3. To maintain this current, the sources has to keep expending its energy.
4. Part of this energy is consumed in useful work(Like rotating of fan)
5. Rest of energy of source is converted into heat, that raises the temperature of gadget.
6. This is known as heating effect of electric current.
7. This effect is utilized in devices such as electric heater, iron etc.

Mathematical Expression

Let us suppose that current (I) is flowing through a resistor of resistance(R) for the time (t). The potential difference across the resistance is (V).

$V = \frac{W}{Q}$

$\therefore$ Work done in moving the charge Q will be

W = VQ

Then power, $P = \frac{W}{t}$ [Rate of change of work done]

= $\frac{{VQ}}{t}$

$P = VI\;\;\;\;\left[ {\because \;I = \frac{Q}{t}} \right] - - (1)$

Heat energy supplied by the source for time t will be

(H = P t) $\left[ {\because \;P = \frac{{Energy\;of\;work}}{{time}}} \right] - - (2)$

Put equation (i) in equation (2)

H = VIt

= (IR) It $\left[ {\therefore \;V = IR\;Ohm's\;Law} \right]$

$H = {I^2}Rt$

This is known as Joule’s Law

The law stated that the heat produced in a resistor is :

(i) directly proportional to square of the current (I)

(ii) directly proportional to resistance (R) for given current

(iii) directly proportional to time (t) for which current flow through resistor.

Application of Heating Effect of Electric Current

1. Used in electric iron, toaster, oven, heater etc.

2. It is also used in bulb to produce light.
(Filament of bulb is made of strong metal with high melting point suchas tungsten
( $m.pt = {3380^0}C$ ). This filament can retain as much of the heat generated as possible, to become very hot and emit light)

3. It is also used in the “fuse connected in an electric circuit. Fuse is asafety device, that protect the circuits and appliance by stopping theflow of high current. The wire of fuse is made of an alloy of metalse.g., Aluminium Copper, Iron, Lead etc. The alloy should be of lowmelting point and high resistivity, fuse is always connected in seriescircuit. When large current flows through the circuit, the temperatureof fuse wire will increase. This melts the fuse wire and breaks thecircuit.
“ Fuses” used for domestic purposes are rated as 1A, 2A, 3A, 5A, 10Aetc. for various operation depending upon the power of appliance using.

Example : let us consider an appliance “electric Iron” which consume1KW electric power, at 220V

P = VI

$I = \frac{P}{V}\; = \;\frac{{1KW}}{{220V}}\; = \;\frac{{1000W}}{{220V}}$

I=4.54A

In this case a 5A fuse is required.

Electric Power : In case of electricity, it is defined as the rate of changeof electrical energy dissipated or consumed in an electric circuit.

P=VI

Or $P = {I^2}R\;\;\;\;\;(\because \;V = IR\;Ohm's\;Law)$

$Or\;\;P = \frac{{{V^2}}}{R}\;\;\;\;\;\;\;\;\;\left( {\because \,I = \frac{V}{R}} \right)$

Or $P = \frac{{Electrical\;Energy(E)}}{{time}}$

SI unit of electric power is “Watt” (W)

1 Watt $\to$ Defined as the power consumed by a device, when IA of current passes through it at the potential difference of IV.

P=VI

1 Watt = 1 Volt $\times$ 1 Ampere

Electrical Energy

$P = \frac{E}{t}\;\;\left[ \begin{gathered} E - Electrical\;Energy \\ t - time \end{gathered} \right]$

$\therefore \;E = P \times t$

SI unit of electrical energy =Ws or J

Commercial unit of electrical energy=KWh or one unit

$E = P \times t$

$\therefore \;KWh\;\;\;\;\;\;\;\;\; = 1KW\; \times \;h$

= 1000Wx3600s

= 36 x 10 $^5$ Ws

= 3.6 x 10 $^6$ J (SI unit Ws=J)

$\therefore \;\;\;1KWh = 3.6\; \times \;{10^6}J$

One horse power = 746W

Electricity class 10 Notes

CBSE Revision notes (PDF Download) Free
Revision notes for Class 10 Science PDF
CBSE Revision notes Class 10 Science – CBSE
CBSE Revisions notes and Key Points Class 10 Science
Summary of the NCERT books all chapters in Science class 10
Short notes for CBSE class 10th Science
Key notes and chapter summary of Science class 10
Quick revision notes for CBSE board exams

CBSE Class 10 Revision Notes and Key Points

Electricity class 10 Notes. CBSE quick revision note for Class 10 Science, Chemistry, Maths, Biology and other subject are very helpful to revise the whole syllabus during exam days. The revision notes covers all important formulas and concepts given in the chapter. Even if you wish to have an overview of a chapter, quick revision notes are here to do if for you. These notes will certainly save your time during stressful exam days.

To download Electricity class 10 Notes, sample paper for class 10 Mathematics, Social Science, Science, English Communicative; do check myCBSEguide app or website. myCBSEguide provides sample papers with solution, test papers for chapter-wise practice, NCERT solutions, NCERT Exemplar solutions, quick revision notes for ready reference, CBSE guess papers and CBSE important question papers. Sample Paper all are made available through the best app for CBSE students and myCBSEguide website.

Test Generator

Create question paper PDF and online tests with your own name & logo in minutes.

Create Now

myCBSEguide

Question Bank, Mock Tests, Exam Papers, NCERT Solutions, Sample Papers, Notes